
| Round / square tube size | Model | Laser power | Cutting length | Max tube load |
| Φ10-110 / □10-110 mm | KCT6012T2 | 1500W / 3000W | 6500 mm | 80 kg |
| Φ10-150 / □10-150 mm | KCT6016T2 | 1500W / 3000W | 6500 mm | 80 kg |
| Φ20-230 / □20-230 mm | KCT6024T2 / KCT6036T2 | 1500W / 3000W / 6000W | 6500 mm | 80 kg |
| Φ20-230 / □20-230 mm | KCT9024T2 | 3000W / 6000W / 12000W | 9500 mm | 300 kg |
| Φ20-350 / □20-350 mm | KCT9036T2 | 3000W / 6000W / 12000W | 9500 mm | 500 kg |
Selection guide based on the standard configuration table above. Chuck size follows the model: 120 / 160 / 240 / 360 mm pneumatic chuck. Tell us your tube size, wall thickness and daily output and we will confirm the model and laser power.




|
TECHNICAL PARAMETERS |
||||||
| Machine Model | KCT6012T2 | KCT6016T2 | KCT6024T2 | KCT6036T2 | KCT9024T2 | KCT9036T2 |
| Clamping Range | Round Pipe Φ10-110mm Square Pipe □10-110mm | Round Pipe Φ10-150mm Square Pipe □10-150mm | Round Pipe Φ20-230mm Square Pipe □20-230mm | Round Pipe Φ20-230mm Square Pipe □20-230mm | Round Pipe Φ20-230mm Square Pipe □20-230mm | Round Pipe Φ20-350mm Square Pipe □20-350mm |
| Laser Power | 1500W/3000W | 1500W/3000W | 1500W/3000W/6000W | 1500W/3000W/6000W | 3000W/6000W/12000W | 3000W/6000W/12000W |
| Max. Rotational Speed | 100r/min | 100r/min | 100r/min | 100r/min | 100r/min | 100r/min |
| Eff. Tube Cutting Length | 6500mm | 6500mm | 6500mm | 6500mm | 9500mm | 9500mm |
| Max. Single Tube Load Cap. | 80kg | 80kg | 80kg | 80kg | 300kg | 500kg |
| Chuck Structure | 120 Pneumatic Chuck | 160 Pneumatic Chuck | 240 Pneumatic Chuck | 360 Pneumatic Chuck | 240 Pneumatic Chuck | 360 Pneumatic Chuck |
| Rated Volt. & Freq. | 3PH 380V 50Hz | 3PH 380V 50Hz | 3PH 380V 50Hz | 3PH 380V 50Hz | 3PH 380V 50Hz | 3PH 380V 50Hz |
Q: What tube sizes can this machine cut?
A: Across the six models, round tube from Φ10 mm to Φ350 mm and square tube from □10 mm to □350 mm. KCT6012T2 starts at Φ10-110 mm, and KCT9036T2 covers the largest range at Φ20-350 mm. See the selection guide above.
Q: What is the difference between a two-chuck and a three-chuck tube laser?
A: With two chucks, the rear chuck has to keep holding the tube until the last cut, so a short unused tail is left at the end of every tube. A three-chuck machine adds a middle chuck that takes over clamping, which allows zero-tail cutting and saves material on high-volume runs.
Q: What do the adaptive follow-up rollers do?
A: They support the middle of the tube and rise or fall with its diameter, so a long tube does not sag or swing while the chucks rotate it at high speed. Without them, a 9.5 m tube would bow under its own weight and the cut would drift.
Q: How accurate is the chuck clamping?
A: The full-stroke pneumatic chucks hold concentricity within 0.1 mm over the full clamping range, so the tube stays centred without manual shimming. Clamping is automatic, which keeps repeatability stable across a production run.
Q: Can it cut holes, slots and arcs, not just straight cuts?
A: Yes. Round and square tube, holes, slots and arcs are all standard applications. Because the tube rotates and the head moves along it, features on different faces are cut in one setup without re-clamping.
Q: Is bevel cutting available?
A: Yes, as an option. The 3D bevel head cuts V, X, Y and K shapes with an adjustable angle up to ±45°, which produces a welding-ready edge in a single pass instead of a second grinding step.
Q: What tube length and weight can it handle?
A: 6500 mm effective cutting length on the KCT60 series and 9500 mm on the KCT90 series. Maximum single tube load is 80 kg on the KCT60 series, 300 kg on KCT9024T2 and 500 kg on KCT9036T2, with 100 r/min maximum rotation speed.
Q: Can you customize the voltage for my country?
A: Yes. 3PH 380V 50Hz is standard on all six models; other voltages and configurations are available for overseas projects.
Q: What is the price and delivery time, and can I test my tube?
A: Price depends on model, laser power and whether the bevel head is included, and delivery is normally 30-40 days after deposit. Send your tube size, wall thickness and cut drawings and we will arrange a sample cutting test with the quotation.