H-Beam Laser Cutting Machine

Short Description:

H-beam laser cutting machine for steel structure fabricators, bridge component shops, tower crane builders and warehouse racking producers that cut H-sections, channel steel and angle steel. Web and flange are cut in one setup, and V, X, Y and K bevels are formed in a single pass, so the secondary grinding step before welding drops out of the process.

The standard model KCH12010 handles sections from 100×100 mm to 1000×5000 mm. Laser power runs 3000W / 12000W / 20000W, with X/Y positioning accuracy ±0.25 mm, repeat accuracy ±0.05 mm, maximum linkage speed 60 m/min and acceleration 0.3G.

  • Heavy-duty welded bed
  • High rigidity long-travel frame
  • One-time bevel cutting (V/X/Y/K)
  • Fully enclosed protection


Recommended Cutting Thickness for H-Beam and Structural Profiles

Workpiece3000W12000W20000W
Carbon steel web / flange thickness1-10 mm1-25 mm1-40 mm
Section range (web height × length)100×100 mm to 1000×5000 mm
One-pass bevelV / X / Y / K, ±45°

Recommended range for production cutting with clean edges. Stainless and aluminium profiles are available on request. Actual results vary with material grade, assist gas and required edge finish.

1Heavy-Duty Monolithic Load-Bearing Bed

 

Heavy steel section supported on the monolithic welded bed of the H-beam laser cutting machine

 

Engineered with an integrated, all-welded steel structure, this bed is built to sustain continuous, ultra-heavy loads without deformation or structural sagging. It is the ideal foundation for processing large-section heavy profiles with rock-solid stability.

 

2One-Pass Beveling for Superior Efficiency
Long roller support table carrying H-beam profiles into the H-beam laser cutting machine
Supports high-precision V, Y, X, and K-shaped beveling in a single pass. By eliminating the need for secondary grinding before welding, it drastically simplifies the steel structure fabrication process and maximizes your operational throughput.
3High-Rigidity Long-Travel Frame
Fiber laser head cutting the flange of an H-beam with sparks on the long-travel gantry
The all-welded, high-rigidity frame is designed to resist torsion and deformation over extended lengths. It ensures consistent, stable precision during long-distance cutting, guaranteeing perfect dimensional uniformity across the entire length of H-beams.
4Fully Enclosed Protection System
Accordion bellows shielding the guide rails and racks of the H-beam laser cutter
Featuring a comprehensive shield design for guide rails and racks to prevent the ingress of heavy profile dust and metal shavings. This proactive protection significantly reduces failure rates, extends the machine’s service life, and ensures reliable performance in harsh industrial environments.

TECHNICAL PARAMETER

Machine Model KCH12010
Working Area 100*100-1000*5000mm
Laser Power 3000W/12000W/20000W
X/Y Axis Distance 2000mm/2600mm/1050mm
X/Y Axis Positioning Accuracy ±0.25mm
X/Y Axis Repeat Positioning Accuracy ±0.05mm
Maximum Linkage Positioning Speed 60m/min
Maximum Acceleration 0.3G
Power Rated Voltage and Frequency 380V/50Hz

 

 

Suitable Industries Steel structure, construction, warehouse racking, tower cranes, bridge components, steel service centers

 

 

Application Scenarios H-beam / channel steel / angle steel cutting; one-time bevel cutting for welding preparation; structural profile processing.

FAQ

Q: Which steel profiles can this machine cut?
A: It cuts H-beams, channel steel and angle steel. The standard model KCH12010 handles sections from 100×100 mm up to 1000×5000 mm, which covers most steel structure, bridge and tower crane work.

Q: What does one-pass bevel cutting mean?
A: The cutting head completes V, X, Y and K bevels in the same pass that separates the profile, so the edge is already welding-ready. Secondary grinding or a separate beveling station is no longer needed.

Q: Which laser power should I choose?
A: 3000W, 12000W or 20000W. 12000W covers web and flange thickness up to 25 mm, which is most structural work; 20000W is specified for heavy sections and thick flanges up to 40 mm.

Q: What accuracy can it hold on long profiles?
A: X/Y positioning accuracy ±0.25 mm and repeat positioning accuracy ±0.05 mm, held along the full travel by the all-welded high-rigidity frame. The machine is built for profile work rather than thin sheet tolerances.

Q: How does the bed handle continuous heavy H-beams?
A: The bed is one monolithic welded steel structure instead of bolted sections, so it carries continuous heavy loads without sagging or deforming. That rigidity is what keeps dimensional uniformity along the whole length of the beam.

Q: How are the guide rails and racks protected from dust?
A: A full shielding system covers the guide rails and racks and keeps heavy profile dust and metal shavings out, which lowers failure rates and maintenance load in a fabrication shop where other cutting processes also run.

Q: What is the maximum linkage speed and acceleration?
A: 60 m/min maximum linkage speed with 0.3G maximum acceleration. Traverse speed is matched to heavy profile handling, where positioning stability matters more than raw speed.

Q: Can you customize the voltage for my country?
A: Yes. 3PH 380V 50Hz is the standard configuration; other voltages and configurations are available for overseas projects.

Q: What is the price and delivery time, and can I test my profile?
A: Price depends on section range, laser power and bevel configuration, and delivery is normally 30-40 days after deposit. Send your profile type, section size and flange thickness and we will arrange a sample cutting test with the quotation.

Leave Your Message

    * Name

    * Email

    Phone/WhatsAPP/WeChat

    * That's what I'm going to say.


    Leave your message

      * Name

      * Email

      Phone/WhatsAPP/WeChat

      * That's what I'm going to say.